aphids » GCP Sunset Blog

Superior bean pods boost yields in face of drought

Africa, Beans, Capacity building, Crop breeding, Legumes No Responses »

Jun 192015

Bean Market in Kampala, Uganda.

Common beans are the world’s most important food legume, particularly for subsistence and smallholder farmers in East and Southern Africa. They are a crucial source of protein, are easy to grow, are very adaptable to different cropping systems, and mature quickly.

To some, beans are ‘a near-perfect food’ because of their high protein and fibre content plus their complex carbohydrates and other nutrients. One cup of beans provides at least half the recommended daily allowance of folate, or folic acid – a B vitamin that is especially important for pregnant women to prevent birth defects. One cup also supplies 25–30 percent of the daily requirement of iron, 25 percent of that of magnesium and copper, and 15 percent of the potassium and zinc requirement.

Unfortunately, yields in Africa are well below their potential – between 20 and 30 percent below. The main culprit is drought, which affects 70 percent of Africa’s major bean-producing regions. Drought is especially severe in the mid-altitudes of Ethiopia, Kenya, Malawi and Zimbabwe, as well as across Southern Africa.

“For the past seven or eight years, rains have been very unreliable in central and northern Malawi,” says Virginia Chisale, a bean breeder with Malawi’s Department of Agricultural Research and Technical Services.

“In the past, rains used to be very reliable and people were able to know the right time to plant to meet the rains in critical conditions,” she says. “Now these primary agriculture regions are either not receiving rain for long periods of time, or rains are not falling at the right time.”

Virginia recounts that during the 2011/12 cropping season there were no rains soon after planting, when it is important that beans receive moisture. Such instances can cut bean yields by half.

Steve Beebe in the field.

“Drought is a recurrent problem of rainfed agriculture throughout the world,” says Steve Beebe, a leading bean breeder with the International Center for Tropical Agriculture (CIAT). “Since over 80 percent of the world’s cultivated lands are rainfed, drought stress has major implications for global economy and trade.”

Steve was the Product Delivery Coordinator for the beans component of the Legumes Research Initiative (RI), part of Phase II of the CGIAR Generation Challenge Programme (GCP). The RI incorporated several projects, the biggest of which was Tropical Legumes I (TLI) (see box). The main objective of the work on beans within TLI was to identify and develop drought-tolerant varieties using marker-assisted breeding techniques. The resulting new varieties were then evaluated for their performance in Ethiopia, Kenya, Malawi and Zimbabwe.

“It’s vital that we develop high-yielding drought-tolerant varieties so as to help farmers, particularly in developing countries, adapt to drought and produce sustained yields for their families and local economies,” says Steve.

For an overview of the work on beans from the perspectives of four different partners, watch our video below, “The ABCs of bean breeding”.

What makes a plant drought tolerant?

The question of what makes a plant drought tolerant is one that breeders have debated for centuries. No single plant characteristic or trait can be fully responsible for protecting the plant from the stress of intense heat and reduced access to water.

“It’s a difficult question to answer for any plant, including beans,” says Steve. “Once you do isolate a trait genetically, it can often be difficult to identify this trait in a plant in the field, for example, identifying the architecture and length of a plant’s roots.”

Phenotyping is an important process in conventional plant breeding. It involves identifying and measuring the presence of physical traits such as seed colour, pod size, stem thickness or root length. Gathering data about a range of such characteristics across a number of different plant lines helps breeders decide which plants to use as parents in crosses and which of the progeny have inherited useful traits.

Root length has long been thought of as a drought-tolerance trait: the longer the root, the more chance it has of tapping into moisture stored deeper in the soil profile.

Given, however, that it is difficult to inspect root length in the field, researchers at CIAT have been exploring other more accessible drought-tolerance traits they can more easily identify and measure. One of these is measuring the weight of the plants’ seeds.

Comparison between varieties in trials of drought tolerant beans at CIAT’s headquarters in Colombia.

Fat beans indicate plants coping with drought stress

“We measure seed weight because we are discovering that under drought stress, drought-tolerant bean varieties will divert sugars from their leaves, stems and pods to their seed,” says Steve. “We call this trait ‘pod filling’, and for us it is the most important drought-tolerance trait to be found over the last several years.”

Finding bean plants with larger, heavier seeds when growing under drought conditions indicates that the plants are coping well, and means farmers’ yields are maintained.

As part of GCP’s Legumes RI, African partners like Virginia have been measuring the seed weight of several advanced breeding lines, which can be used as parents to develop new varieties. These breeding lines have been bred by CIAT and demonstrate this pod-filling process and consequent tolerance of drought.

Although this measurement is relatively cheap and easy for breeders all over the world to do, Steve and his team are interested in finding an even more efficient way to spot plants that maintain full pods under drought.

“We are trying to understand which genes control this trait so we can use molecular-assisted breeding techniques to determine when the trait is present,” says Steve. Having identified several regions of genes related to pod filling, he and his team have developed molecular markers to help breeders identify which plants have these desired genes. “The use of molecular markers in selection significantly reduces the time and cost of the breeding process, making it more efficient. This means that we get improved varieties out to farmers more quickly.”

Bean farmer in Rwanda.

Molecular markers (also known as DNA markers) are used by researchers as ‘flags’ to identify particular genes within a plant’s genome (DNA) that control desired traits, such as drought tolerance. These markers are themselves fragments of DNA that highlight particular genes or regions of genes by binding near them.

To use an analogy, think of a story as the plant’s genome: its words are the plant’s genes, and a molecular marker works like a text highlighter. Molecular markers are not precise enough to highlight specific words (genes), but they can highlight sentences (genomic regions) that contain these words (genes), making it easier and quicker to identify whether or not they are present.

Beans from Rwanda.

Plant breeders can use molecular markers from early on in the breeding process to choose parents for their crosses and determine whether progeny they have produced have the desired trait, based on testing only a small amount of seed or seedling tissue.

“If the genes are present, we grow the progeny and conduct the appropriate phenotyping; if not, we throw the progeny away,” explains Steve. “This saves us resources and time because we need to grow and phenotype only the few hundred progeny which we know have the desired genes, instead of a few thousand progeny, most of which would not possess the gene.”

GCP has supported this foundation work, building on the extensive bean research already done by CIAT dating back to the 1970s, to develop molecular markers not only for drought-tolerance traits such as pod filling, but also for traits associated with resistance to important insect and disease menaces.

“Under drought conditions, plants become more susceptible to pests and diseases, so it was important that we also try to identify and include resistance traits in the drought-tolerant progeny,” says Steve.

Drought is but one plant stressor – diseases and pests wreak havoc too

Common bacterial blight on bean.

The bean diseases that farmers in Ethiopia, Kenya, Malawi and Zimbabwe continually confront are angular leaf spot, bean common mosaic virus, common bacterial blight and rust. Key insect pests are bean stem maggot and aphids.

“We’ve had reports of bean stem maggot and bean common mosaic virus wiping out a whole field of beans,” says Virginia. “Although angular leaf spot and common bacterial blight are not as damaging, they can still reduce yields by over 50 percent.”

Virginia says this is devastating for farmers in Malawi, many of whom only have enough land and money to grow beans to feed their families and sell what little excess there is at market to purchase other necessities.

“This is why we are excited by the prospect of developing not just drought-tolerant varieties, but drought-tolerant varieties with disease and pest resistance as well,” says Virginia.

Virginia’s team in Malawi – along with other breeders in Ethiopia, Kenya and Zimbabwe – are currently using over 200 Mesoamerican and Andean bean breeding lines supplied by CIAT to help breed for drought tolerance and disease and pest resistance. Although many do not yet have the capacity to do molecular breeding in their countries, thanks to advances in plant science it is becoming more feasible and cheaper to outsource molecular breeding stages of the process (see box above).

“With help from GCP and CIAT, we have successfully crossed a line from CIAT with some local varieties to produce plants that are high yielding and resistant to most common bean diseases,” Virginia says.

Malawian farmer Jinny Lemson grows beans to feed her livestock.

Ethiopia’s new bean breeders

Young women sorting beans after a harvest in Ethiopia.

One man who has been helping build this new breeding capacity is Bodo Raatz, a molecular geneticist who joined CIAT and GCP’s Legumes RI in late 2011.

“We’ve [CIAT] hosted several African PhD students here in Colombia and have conducted several workshops in Colombia and Africa too,” says Bodo.

“At the workshops we teach local breeders and technicians how to use genetic tools and markers for advanced breeding methods, phenotyping and data management. The more people there are who can do this work, the quicker new varieties will filter through to farmers.”

Bodo says he has found delivering the training both personally and professionally rewarding, especially “seeing the participants understand the concepts and start using the tools and techniques to develop new lines [of bean varieties] and contribute to the project.”

One national breeder whom Bodo has seen advance from the training is Daniel Ambachew, then a bean breeder at the Southern Agricultural Research Institute (SARI) in Ethiopia.

Daniel started as a GCP-funded Master’s student enrolled at Haramaya University, Ethiopia, evaluating bean varieties with both tolerance to drought and resistance to bean stem maggot. He eventually became the Ethiopian project leader for beans within GCP’s Legumes RI.

“Daniel is currently one of only a handful of bean breeders in Ethiopia who are using molecular-assisted breeding techniques to breed new varieties,” says Bodo. “It’s quite an achievement, especially now that he has taken on the lead role in Ethiopia.”

Buying and selling at a bean market in Kampala, Uganda.

For Daniel, learning about and using the new molecular-breeding techniques has been an exciting new challenge. “The most interesting part of the technology is that it helps us understand what is going on in the plant at a molecular level and lets us know if the crosses we are making are successful and the genes we want are present,” says Daniel. “All this helps improve our efficiency and speeds up the time it takes us to breed and release new varieties for farmers.”

By the end of 2014, Daniel and his team had finished the third year of trials and had several drought-tolerant lines ready for national trials in 2015 and eventual release in 2016.

Between 2012 and 2014, Daniel, and two other breeders from SARI, attended GCP’s three-year Integrated Breeding Multiyear Course, learning how to design molecular-assisted breeding trials; collect, analyse and interpret genotypic and phenotypic data from the trials; and manage data using the GCP’s Integrated Breeding Platform (IBP), particularly its Breeding Management System (BMS).

“The IBP is a really fantastic tool,” says Daniel. “During the course we learnt about the importance of recording clear and consistent phenotypic data, and the IBP helps us to do this as well as store it in a database. It makes it easier to refer to and learn from the past. I’m now trying to pass on the knowledge I’ve learnt as well as create and implement a data-management policy for all plant breeders and technicians in our institute.”

Bodo agrees with Daniel about the importance of IBP and believes it will be a true legacy of GCP beyond the Programme’s end in 2014. “The Platform has been designed to be the main data-management platform for plant breeders. It allows breeders to talk the same language and will reduce the need for learning new systems.”

Daniel says the challenge for his institute now is to build further capacity among staff – and to retain it. “At the moment we only have two bean breeders,” says Daniel. “It’s hard to retain research staff in Ethiopia as salaries are very low, so people move on to new, higher paying positions when they get the chance. It’s not unique to Ethiopia, but true of all Africa.”

Bean trials at KALRO in Kenya.

Kenya chasing higher bean yields

Across the border, Kenya has also been facing staffing issues.

“We are behind Ethiopia, Malawi and Zimbabwe in terms of our capacity and our trials,” says David Karanja, a bean breeder and project leader at the Kenya Agricultural and Livestock Research Organisation (KALRO, formerly the Kenya Agricultural Research Institute, or KARI). “At the start of the project, we didn’t have a breeder to lead the project for almost two years. However, we are now rapidly catching up with the others.”

And it’s a good thing too, as the country is in need of higher yielding beans to accommodate its population’s insatiable appetite for the crop. Out of the four target African countries, Kenya is the largest bean producer and consumer. As such, the country relies on beans imports from Ethiopia, Malawi, Tanzania and Uganda.

“A lot of families eat beans every day,” says David. “On average, the population eats 14–16 kilograms per person each year, but in western Kenya the average is over 60 kilograms.”

Githeri, a Kenyan staple food made with maize and beans.

Kenyans consume an average total of 400,000 tonnes of beans each year, consistently more than the country produces. Projected trends in population growth indicate that this demand for beans will continue to increase by three to four percent annually.

Even though the area planted to beans has been increasing, David says farmers and breeders need to work together to improve productivity, which is well below where it should be. “The national average yield is 100 kilograms per hectare, which can range from 50 kilograms up to 700 kilograms, depending on whether we experience a drought, or a pest or disease epidemic,” explains David. “The minimum target we should be aiming for is 1,200 kilograms per hectare.”

Such a figure may seem impossible, but David believes that new breeding techniques and the varieties KALRO are producing with the help of CIAT are providing hope that farmers can reach these lofty goals.

“We have several bean lines that are showing good potential to produce higher yields under drought conditions and also have resistance to diseases like rust and mosaic virus,” says David. “They are currently under national trials, and we are confident these will be released to farmers in 2015.”

Varieties fare differently in KALRO bean trials in Kenya.

Commercialising beans

Maturing bean pods.

“Many subsistence farmers have limited access to good quality bean seeds; they lack knowledge of good crop, pest and disease management; and they have poor post-harvest storage facilities,” says Godwill Makunde, who was previously a breeder at Zimbabwe’s Crop Breeding Institute (CBI) and leader of GCP’s Legumes RI bean project in Zimbabwe.

TLI’s sister project, Tropical Legumes II (TLII, see box above), led by the International Crops Research Institute for the Semi-Arid Tropics (ICRISAT), provided the route by which the upstream work of TLI would have impact in helping these farmers, seeking to deliver the new varieties developed under TLI into their hands. As part of TLII, Godwill, his successor Bruce Mutari, and other African partners worked on developing sustainable seed systems.

“Because beans are self-pollinating, which means each crop is capable of producing seed exactly as it was sown, farmers tend to propagate seed on farm,” says Godwill. “While this can be cost effective, it can reduce farmers’ access to higher yielding, tolerant lines, like the ones we are currently producing.”

In none of the partner countries of TLI and TLII are there formal systems for producing and disseminating bean seeds. Godwill and other partners are working with seed companies on developing a sustainable model where both farmers and seed companies can benefit.

Success built on a solid foundation

Field workers tend beans in Rwanda.

A key to the success of the beans component of GCP’s Legumes RI, according to Ndeye Ndack Diop, GCP’s Capacity Building Theme Leader and TLI Project Manager, has been partners’ existing relationships with each other.

“Many of the partners are part of a very strong network of bean breeders: the Bean Coordinated Agricultural Project [BeanCAP],” explains Ndeye Ndack, adding that the TLI and BeanCAP networks benefited each other.

BeanCAP released more than 1,500 molecular markers to TLI researchers, which have helped broaden the genetic tools available to developing-country bean breeders.

TLI was also able to leverage and advance previous BeanCAP work and networks. For example, it was through this collaboration that GCP was introduced to LGC Genomics, a company it then worked with on many other crop projects.

To sustain integrated breeding practices beyond the Programme’s close in 2014, GCP established Communities of Practice (CoPs) that are discipline- and commodity-oriented.

“GCP’s CoP for beans has also helped to broaden both the TLI and BeanCAP networks too,” says Ndeye Ndack. “The ultimate goal of the CoPs is to provide a platform for community problem solving, idea generation and information sharing.”

Developing physical capacity

Besides developing human capacity, GCP has also invested in developing infrastructure in Ethiopia, Kenya and Zimbabwe.

SARI now has an irrigation system to enable them to conduct drought trials year round. “We have 12.5 hectares of irrigation now, which we use to increase our efficiency and secure our research,” says Daniel. “We can also increase seed with this irrigation during the off-season and develop early generation seeds for seed producers.”

In Zimbabwe, CBI received specialised equipment that enables them to extract DNA and send it for genotyping in the UK.

Both SARI and CBI also received automatic weather stations from GCP for high-precision climatic data capture, with automated data loading and sharing with other partners in the network.

Delivering the right beans to farmers

Back in Malawi, Virginia says another important facet of the TLII project is that researchers understand what qualities farmers want in their beans. “It’s no use developing higher yielding beans if the farmer doesn’t like the colour, or they don’t taste nice,” she says. “For example, consumers in central Malawi prefer khaki or ‘sugar beans’, which are tan with brown, black or red speckles. While those in southern Malawi tend to prefer red beans. Farmers know this and will grow beans that they know consumers will want.”

Diversity at bean market in Masaka, Uganda.

Breeders in all four countries have been conducting workshops and small trials with farmers to find out this information. In Kenya, David finds farmer participation a great way to promote the work they are doing and show the impact the new drought-tolerant and disease-resistant lines can have.

“Farmers are excited and want to grow these varieties immediately when they see for themselves the difference in yield these new varieties can produce compared to their regular varieties,” says David. “They understand the pressure on them to produce more yields and are grateful that these varieties are becoming more readily available as well as tailored to their needs.”

For Steve, such anecdotes provide him and his collaborators with incentives to continue their quest to discover more molecular markers associated with drought tolerance, post-GCP.

“It’s a testament to everyone involved that we have been able to develop these advanced lines with pod-filling traits using molecular techniques, and make them available to farmers in six years instead of ten,” says Steve.

Cowpea research helps secure food supply during the ‘hungry months’ in Africa

Africa, Capacity building, Cowpeas, Crop breeding, Genetics, Genomics, Legumes No Responses »

Jun 122015

Growing cowpea pods.

Each year, millions of people in Senegal go hungry for several months, many surviving on no more than one meal a day. Locals call this time soudure – the hungry period. It typically lasts from June through to September, when previous winter and spring cereal supplies are exhausted and people wait anxiously for a bountiful autumn cereal harvest.

During this period, a bowl of fresh green cowpea pods once a day is the best that many people can hope for. Cowpeas are the first summer crop to mature, with some varieties ready to harvest in as little as 60 days.

While cowpeas provide valued food security in Africa, yields remain low. In Senegal, average cowpea yields are 450 kilograms per hectare, a mere 10–30 percent of their potential. This poor productivity is primarily because of losses due to insects and diseases, but is sometimes further compounded by chronic drought.

In 2007, the CGIAR Generation Challenge Programme (GCP) brought together a team of plant breeders and geneticists from Burkina Faso, Mozambique, Nigeria, Senegal and the USA to collaborate on cowpea. Their goal was to breed varieties that would be higher yielding, drought tolerant and resistant to pests and diseases, and so help secure and improve local cowpea production in sub-Saharan African countries.

A trader selling cowpea at Bodija market, Ibadan, Nigeria.

Cowpea production – almost all of it comes from Africa

A type of legume originating in West Africa, cowpeas are also known as niébé in francophone Africa and as black-eyed peas in the USA. They are well adapted to drier, warmer regions and grow well in poor soils. In Africa, they are mostly grown in the hot, drought-prone savannas and very arid sub-Saharan regions, often together with pearl millet and sorghum.

Nutritionally, cowpeas are a major source of dietary protein in many developing countries. Young leaves, unripe pods and peas are used as vegetables, and the mature grain is processed for various snacks and main meal dishes. As a cash crop, both for grain and animal fodder, cowpea is highly valued in sub-Saharan Africa.

Worldwide, an estimated 14.5 million hectares of land is planted with cowpea each year. Global production of dried cowpeas in 2010 was 5.5 million tonnes, 94 percent of which was grown in Africa.

“In Senegal, cowpeas cover more than 200,000 hectares,” says Ndiaga Cissé, cowpea breeder at L’institut sénégalais de recherches agricoles (ISRA; Senegalese Agricultural Research Institute). “This makes it the second most grown legume in Senegal, after groundnuts.”

In 2011, Senegal experienced its third drought within a decade. Low and erratic rainfall led to poor harvests in 2011 and 2012: yields of cereal crops (wheat, barley and maize) fell by 36 percent compared to 2010. Consequently, the hungry period in 2012 started three months earlier than usual, making gap-fillers like cowpea even more important. In fact, cereal production in sub-Saharan African countries has not seen substantial growth over the last two decades – total area, yield and production grew by only 4.3 percent, 1.5 percent and 5.8 percent, respectively.

Climate change is expected to further compound this situation across sub-Saharan Africa. Droughts are forecast to occur more frequently, weakening plants and making them more vulnerable to pests and diseases.

“Improved varieties of cowpeas are urgently needed to narrow the gap between actual and potential yields,” says Ndiaga. “They will not only provide security to farmers in the face of climate change, but will also help with food security and overall livelihoods.”

Farmers in Northern Nigeria transport their cowpea harvest.

Mapping the cowpea genome

For over 30 years, Phil Roberts, a professor in the Department of Nematology at the University of California, Riverside (UCR), has been breeding new varieties of cowpea. “UCR has a long history of research in cowpea breeding that goes back to the mid-seventies,” explains Phil. “One of the reasons we were commissioned by GCP in 2007 was to use our experience, particularly in using molecular breeding, to help African cowpea-breeding programmes produce higher yielding cowpeas.”

For seven years, Phil and his team at UCR coordinated the cowpea component of the Tropical Legumes I (TLI) project led by GCP (see box below). The objective of this work was to advance cowpea breeding by applying modern, molecular breeding techniques, tools and knowledge to develop lines and varieties with drought tolerance and resistance to pests and diseases in the sub-Saharan African countries Burkina Faso, Mozambique, Nigeria and Senegal.

The molecular breeding technology that UCR uses for cowpeas is based on finding genes that help cowpea plants tolerate insects and diseases, identifying markers that can indicate the presence of known genes, and using these to incorporate valuable genes into higher yielding varieties.

“Using molecular breeding techniques is a lot easier and quicker, and certainly less hit-or-miss, than conventional breeding techniques,” says Phil. “We can shorten the time needed to breed better adapted cowpea varieties preferred by farmers and markets.”

Phil explains that the first priority of the project was to map the cowpea genome.

“The map helps us locate the genes that play a role in expressing key traits such as drought tolerance, disease resistance or pest resistance,” says Phil. “Once we know where these genes are, we can use molecular marker tools to identify and help select for the traits. This is a lot quicker than growing the plant and observing if the trait is present or not.”

To use an analogy, think of the plant’s genome as a story: its words are the plant’s genes, and a molecular marker works as a text highlighter. Molecular markers are not precise enough to highlight specific words (genes), but they can highlight sentences (genomic regions) that contain these words (genes), making it easier and quicker to identify which plants have them. Traditionally, breeders have needed to grow plants to maturity under appropriately challenging conditions to see which ones are likely to have useful traits, but by using markers to flag valuable genes they are able to largely skip this step, and test large amounts of material to choose the best parents for their crosses, then check which of the progeny have inherited the gene or genes.

Diversity of cowpea seed.

Breeding new varieties faster, using modern techniques

A farmer pleased with her cowpea plants.

The main focus of the cowpea component in TLI was to optimise marker-assisted recurrent selection (MARS) and marker-assisted backcrossing (MABC) breeding techniques for sub-Saharan African environments and relevant traits.

MARS identifies regions of the genome that control important traits. In the case of cowpeas, these include drought tolerance and insect resistance. It uses molecular markers to explore more combinations in the plant populations, thus increasing breeding efficiency.

MABC is the simplest form of marker-assisted breeding, in which the goal is to incorporate a major gene from an agronomically inferior source (the donor parent) into an elite cultivar or breeding line (the recurrent parent). Major genes by themselves have a significant effect; it’s therefore easier to find a major gene associated with a desired trait, than having to find and clone several minor genes. The aim is to produce a line made up almost entirely of the recurrent parent genotype, with only the selected major gene from the donor parent.

Using the genome map and molecular markers, the UCR team identified 30 cowpea lines with drought tolerance and pest resistance from 5,000 varieties in its collection, providing the raw material for marker-assisted breeding. “Once we knew which lines had the drought-tolerance and pest-resistance genes we were looking for, we crossed them with high-yielding lines to develop 20 advanced cowpea lines, which our African partners field tested,” says Phil.

The lines underwent final field tests in 2014, and the best-yielding drought-tolerant lines will be used locally in Burkina Faso, Mozambique and Senegal to develop new higher yielding varieties that will be available to growers by 2016.

“While we are still some time off from releasing these varieties, we already feel we are two or three years ahead of where we would be if we were doing things using only conventional breeding methods,” says Ndiaga.

A parasitic Striga plant, in a cowpea experimental plot.

The genome map and molecular markers have helped cowpea breeders like Ousmane Boukar, cowpea breeder and Kano Station Representative with the International Institute of Tropical Agriculture (IITA), headquartered in Nigeria, to locate the genes in cowpeas that play a role in expressing desirable traits.

Ousmane, who was GCP’s cowpea Product Delivery Coordinator, says, “We have used this technology to develop advanced breeding lines that are producing higher yields in drier conditions and displaying resistance to several pests and diseases like thrips and Striga. We expect these lines to be available to plant breeders by the end of 2015.

“TLI has had a huge impact in Africa in terms of developing capacity to carry out marker-assisted breeding,” he says. “This form of breeding helps us to breed new varieties in three to five years instead of seven to ten years.”

Burkina Faso – evaluating new lines to improve the country’s economy

Cowpea is an important crop for the people of Burkina Faso. Over 10 million farmers produce on average 800,000 tonnes of cowpeas each year, making the country the third largest producer in the world, behind neighbours Nigeria and Niger.

Much of Burkina Faso’s cowpea crop is consumed domestically, but the government sees potential in increasing productivity for export to Côte d’Ivoire and Ghana in the south. This new venture would improve the country’s gross domestic product (GDP), which is the third lowest in the world.

“The government is very interested in our research to improve cowpea yields and secure them against drought and disease,” says Issa Drabo, lead cowpea breeder with the Institut de l’Environnement et de Recherches Agricoles (INERA) in Burkina Faso.

“We’ve been working closely with UCR to evaluate advanced breeding lines that we can use in our own breeding programme. So far we have several promising lines, some of which breeders are using to create varieties for release to farmers – some as early as this year.”

Farmers in Burkina Faso discuss cowpea varieties during participatory varietal selection activities.

Outsourcing the molecular work

Issa says his team has mainly been using conventional breeding techniques and outsourcing the molecular breeding work to the UK and USA. “We send leaf samples to the UK to be genotyped by a private company [LGC Genomics], who then forward the data to UCR, who analyse it and tell us which plants contain the desired genes and would be suitable for crossing.”

The whole process takes four to six weeks, from taking the samples to making a decision on which plants to cross.

“This system works well for countries that don’t have the capacity or know-how to do the molecular work,” says Darshna Vyas, a plant genetics specialist with LGC Genomics. “Genotyping has advanced to a point where even larger labs around the world choose to outsource their genotyping work, as it is cheaper and quicker than if they were to equip their lab and do it themselves. We do hundreds of thousands of genotyping samples a day – day in, day out. It’s our business.”

Darshna says LGC Genomics have also developed plant kits, as a result of working more with GCP partners from developing countries. “We would receive plant tissue that was not properly packaged and had become mouldy on the journey. The plant kits help researchers package their tissue correctly. The genotyping data you get from undamaged tissue compared to damaged tissue is a thousand times better.”

Getting the genotyping expertise on the ground

A trader bagging cowpeas at Bodija market, Ibadan, Nigeria.

To reduce their African partners’ reliance on UCR, researchers from the university, including Phil, have been training young plant breeders and PhD students from collaborating institutes. Independent of the cowpea project, they have also been joining GCP’s Integrated Breeding Platform (IBP) training events in Africa to help breeders understand the new technologies.

“All this capacity building we do really gets at the issue of leaving expertise on the ground when the project ends,” says Phil. “If these breeders don’t have the expertise to use the modern breeding technologies, then we won’t make much progress.”

GCP Capacity Building Theme Leader and TLI Project Manager Ndeye Ndack Diop has been impressed by UCR’s enthusiasm to build capacity in its partner countries. “Capacity building is a core objective for GCP and the TLI project,” says Ndeye Ndack. “While it is built into almost all GCP projects, UCR have gone over and above what was expected of them and contributed towards building capacity not only among its partner institutions, but in many other African national breeding institutes as well.”

Issa Drabo reports that in 2014 two of his young researchers from Burkina Faso completed their training in GCP’s Integrated Breeding Multiyear Course, conducted by UCR and the IBP team.

One of Issa’s researchers at INERA, Jean-Baptiste de la Salle Tignegré, says the course helped him understand more about the background genetics, statistical analysis and data management involved in the process of molecular breeding. “Because of the course, we are now able to analyse the genotype data from LGC,” he says.

Mozambique – insects and drought are the problem

In 2010, the Universidade Eduardo Mondlane (UEM) joined the cowpea component of TLI, three years after the project started. “We were a little late to the party because we were busy setting up Mozambique’s first cowpea breeding programme, which only began in 2008,” recalls Rogerio Chiulele, a lecturer at the university’s Faculty of Agronomy and Forestry Engineering and lead scientist for cowpea research in Mozambique for TLI.

That year (2008), UEM received a GCP Capacity building à la carte grant to establish a cowpea-breeding programme for addressing some of the constraints limiting cowpea production and productivity, particularly drought, pests and diseases.

As in Burkina Faso and Senegal, in Mozambique cowpeas are an important source of food, for both protein and profit, particularly for the poor. Cowpeas rank as the fourth most cultivated crop in Mozambique, accounting for about nine percent of the total cultivated area, or an estimated four million hectares of smallholder farms.

Cowpea plants infested by aphids.

Rogerio says that farmers in his country, just as in other parts of Africa, struggle to reach their full yield potential because of climate, pests and diseases. “Several insect pests – such as aphids, flower thrips, nematodes and pod-sucking pests – can substantially reduce cowpea yield and productivity in Mozambique,” he says.

“Cowpea aphids can cause problems at any time in the growing season, but are most damaging during dry weather when they infest seedlings that are stressed from lack of water. In wetter parts of the country, flower thrips – which feed on floral buds – are the most damaging insect pest.” These insects are also major pests in Burkina Faso and Senegal, along with hairy caterpillar (Amsacta moloneyi), which can completely destroy swaths of cowpea seedlings.

Rogerio says breeding for insect resistance and drought tolerance, using marker-assisted techniques, improves breeders’ chances of increased cowpea productivity. “Productivity is key to increasing rural incomes, and new resources can then be invested in other activities that help boost total family income,” says Rogerio. “These new breeding techniques will help us achieve this quicker.”

Three high-yielding varieties to hit the Mozambique market in 2015

Mature cowpea pods ready for harvesting.

Since 2010, Rogerio’s team have quickly caught up to Burkina Faso and Senegal and plan to release three higher yielding new lines with drought tolerance in 2015. One of these lines, CB46, is based on a local cowpea variety crossed with a UCR-sourced American black-eyed pea variety that displays drought tolerance, which potentially has huge market appeal.

“Local varieties fetch, on average, half a US dollar per kilogram, compared to black-eyed pea varieties, whose price is in the region of four to five US dollars,” says Rogerio. “Obviously this is beneficial to the growers, but the benefits for consumers are just as appealing. The peas are better quality and tastier, and they take half as long to cook compared to local varieties.”

All these extra qualities are important to consider in any breeding programme and are a key objective of the Tropical Legume II (TLII) project (see box above). TLII activities, led by ICRISAT, seek to apply products from TLI to make an impact among farmers.

“TLII focuses on translating research outputs from TLI into tangible products, including new varieties,” says Ousmane Boukar, who works closely with Ndiaga, Issa and Rogerio in TLI and TLII.

Building a community of breeders to sustain success

Cowpea flower with developing pods.

Part of Ousmane’s GCP role as Product Delivery Coordinator for cowpeas was to lead a network of African cowpea and soybean breeders, and he champions the need for breeders to share information and materials as well as collaborating in other ways so as to sustain their breeding programmes post-GCP.

“To sustain integrated breeding practices post-2014, GCP has established Communities of Practice (CoP) that are discipline- and commodity-oriented,” says Ndeye Ndack. “The ultimate goal is to provide a platform for community problem solving, idea generation and information sharing.”

Ousmane says the core of this community was already alive and well before the CoP. “Ndiaga, Issa and I have over 80 years combined experience working on cowpea. We have continually crossed paths and have even been working together on other non-GCP projects over the past seven years.”

One such project the trio worked together on was to release a new drought-tolerant cowpea breeding line, IT97K-499-35, in Nigeria. “The performance of this variety impressed farmers in Mali, who named it jiffigui, which means ‘hope’,” says Ousmane. “We shared these new lines with our partners in Mali and Niger so they could conduct adaptation trials in their own countries.”

For young breeders like Rogerio, the CoP has provided an opportunity to meet and learn from these older partners. “I’ve really enjoyed our annual project meetings and feeling more a part of the world of cowpea breeding, particularly since we in Mozambique are isolated geographically from larger cowpea-producing countries in West Africa.”

For Phil Roberts, instances where more-established researchers mentor younger researchers in different countries give him hope that all the work UCR has done to install new breeding techniques will pay off. “Young researchers represent the future. If they can establish a foothold in breeding programmes in their national programmes, they can make an impact. Beyond having the know-how, it is vital to have the support of the national programme to develop modern breeding effort in cowpea – or any crop.”

Setting up breeders for the next 20 years

Farmer harvesting mature cowpea pods.

In Senegal, Ndiaga is hopeful that the work that the GCP project has accomplished has set up cowpea breeders in his country and others for the next 20 years.

“Both GCP’s and UCR’s commitment to build capacity in developing countries like Senegal cannot be valued less than the new higher yielding, drought-tolerant varieties that we are breeding,” says Ndiaga. “They have provided us with the tools and skills now to continue this research well into the future.

“We are close to releasing several new drought-tolerant and pest- and disease-resistant lines, which is our ultimate goal towards securing Senegal’s food and helping minimise the impact of the hungry period.”

GCP Sunset Blog